Introduction
In this guide you'll learn how to correctly fit an original Apple BMS to a Stellar X battery.
Stellar X Cell is the a new design of battery where the customer can transfer the original battery BMS flex to the new battery and avoid getting the Battery pop up message to say the battery has been replaced, it does not require spot welding and has a lower running tempreture than some of the alternatives on the market. Not only that it will even restore your battery health to 100% once changed.
We recommend customers follow a guide on how to do the repair prior to undertaking to avoid any issues with installation and to ensure you get the most from the battery.
Warranty:
- 12 Months
What else may be needed?
- This product does not include battery adhesive we would recommend purchasing adhesive to go with this.
- No Tools are provided with this kit.
Tools
No tools specified.
-
-
Repeatedly bend and remove the excess tabs on the protective board.
-
-
-
Straighten both ends of the protective board.
-
-
-
Stick the yellow sticker on the protective board.
-
-
-
(1/3) Find the battery socket and attach the protective board to the battery socket.
-
-
-
(2/3) Find the battery socket and attach the protective board to the battery socket.
-
-
-
(3/3) Find the battery socket and attach the protective board to the battery socket.
-
-
-
Stick the small black sticker on the fastening part of the protective board and the battery base.
-
Then, stick the big black sticker on the bent part of the battery and protective board.
-
Team
