Introduction
In this short guide we’ll be explaining how to change the cutting gears on your Forward Zero Plus machine. You’ll need to do this if you have a variety of different FORWARD films.
-
-
The type of product you need to cut will determine what cut depth you need to set. You have the choice of 10 different cut depths located on a rotatable dial on the blade holder.
-
Gear 10 is the most protruded the blade will be and gear 1 is the least protruded.
-
-
-
If you aren’t sure which gear to set your blade to then you can follow this handy table we've created.
-
We’ve also supplied it as a printable pdf so you can stick it up on the wall next to your Forward Zero machine! Find the printable pdf at the bottom of this guide in 'Attached Documents'.
-
-
-
Twist the dial to your desired gear.
-
You can now resume using your Forward Zero machine and cut your product.
-
Attached Documents
Team
